Roofing Companies in Collingswood, NJ

Collingswood is a borough of about 1.9 square miles in Camden County, set between the Cooper River on the north and Newton Creek on the south. It was incorporated in 1888 from Haddon Township, and the 2020 census counted about 14,200 residents and about 6,950 housing units. Haddon Avenue, County Route 561, is its main street, with the Collingswood Commercial Historic District and a PATCO station, and U.S. Routes 30 and 130 cross the borough. Collingswood borders Camden, Cherry Hill, Haddon Township, Oaklyn, Pennsauken, and Woodlynne.

The borough’s history shows in its buildings. The Stokes-Lees mansion dates to 1707 and the Collings-Knight homestead to the 1820s, and Knight Park is one of its best-known neighborhoods. Part of Harleigh Cemetery, where Walt Whitman’s tomb stands, lies in the borough. With nearly 7,000 homes in under two square miles, Collingswood is a dense, walkable town of houses close together on tree-lined streets.

Monarch Roofing & Construction serves Collingswood homeowners from our office at 168 Humboldt St in East Rutherford, our headquarters. Our roofing contractors repair and replace residential roofs, repair chimneys and chimney flashing, handle storm-related roof damage, and install gutters and siding.

Roofing Considerations in Collingswood

Older homes on narrow lots

Many Collingswood houses are older and sit close to their neighbors. That combination means steep roofs, dormers, front porches, brick chimneys, and side walls only a few feet from the house next door. Each of those features creates joints that depend on flashing, and narrow side yards make access and cleanup something to plan carefully.

Layers of past repairs

Older roofs often carry the marks of earlier work: shingles installed over an older roof, flashing patched with roofing cement, and vents or chimneys sealed rather than properly flashed. A full tear-off is usually the only way to see and fix what is underneath.

If your home shares a wall

Where houses share a wall or a roofline, a roof repair or replacement on one side needs to tie in cleanly to the other. We pay close attention to the seam between the two roofs and the flashing at any shared chimney or wall.

Tree-lined streets

Mature street trees drop leaves into gutters and valleys and shade roofs enough for moss and algae to grow. Gutter cleaning and branch trimming are a big part of keeping roofs healthy here.

Freeze-thaw winters

Water that gets into cracked chimney crowns and old mortar freezes and expands, widening the gaps every winter.

What a Roof Inspection Covers

  • Shingles: wear, granule loss, cracking, curling, and missing pieces
  • Flashing: chimneys, dormers, porch roofs, shared walls, and valleys
  • Deck: soft or sagging areas
  • Penetrations: plumbing and exhaust vents
  • Ventilation: soffit intake and ridge or gable exhaust
  • Gutters and fascia: rot, pitch, and downspout discharge
  • Attic: water stains, damp insulation, or daylight
  • Layers: how many roofs are on the house

You get a plain explanation and a free written estimate.

Roof Repair in Collingswood

Typical roof repairs we handle:

  • Re-flashing chimneys, dormers, and porch-to-wall joints
  • Repairing the seam between attached roofs
  • Replacing shingles lifted by wind
  • Repairing valleys clogged with leaves
  • Replacing cracked plumbing vent boots
  • Replacing rotted fascia and drip edge

Roof leak repair in older homes takes care, because water can run along rafters before it shows inside. We trace it to the source. Learn more about our roof repair and leak detection.

Roof Replacement in Collingswood

When shingles are worn across the roof, there are several layers, or the deck is failing, roof replacement is the lasting fix. Our roof installation process:

  1. Plan dumpster placement and protect neighboring homes, driveways, and walks
  2. Tear off all existing roofing down to the deck
  3. Inspect board or plywood decking and repair as needed
  4. Install waterproof leak barrier at the eaves, valleys, dormers, and chimneys
  5. Install underlayment over the rest of the deck
  6. Install new drip edge, step flashing, and counter-flashing
  7. Improve attic ventilation where the structure allows
  8. Install starter strips and shingles to the manufacturer’s specifications
  9. Clean up and sweep for nails, including neighboring yards where debris may have landed

Why We Remove the Old Roof

Layering new shingles over old ones hides rotted boards and failed flashing and adds weight to older framing. A full tear-off lets us repair the deck, flash every joint properly, and install leak barrier where it belongs.

What to Expect on Replacement Day

We talk through staging with you, and with neighbors where it affects them, before the first day. Old roofing comes off in sections, and catch-alls and tarps keep debris off neighboring property. If tear-off reveals rotted decking, we show you before replacing it and explain the cost. The roof is closed up against weather at the end of each workday. When the shingles are on, we clean the gutters, run a magnet over the yard and walk, and go over the finished roof with you.

Asphalt Shingle Roofing and Installation

Architectural asphalt shingles are the most common choice for pitched roofs on older homes. Their dimensional look suits many Collingswood houses better than flat three-tab shingles, and they are heavier and more wind-resistant. On shaded lots, algae-resistant shingles help prevent streaks. On an attached home, we can help you pick a color that works next to your neighbor’s roof.

Ventilation and Ice Dams

Older homes were rarely built with balanced attic ventilation. Warm air reaching the underside of the roof in winter melts snow that refreezes at the eaves as ice dams, and an unvented attic bakes shingles in summer. Leak barrier at the eaves protects the roof edge, and adding soffit and ridge ventilation where the structure allows keeps the deck cooler and drier.

Chimneys

Chimney repair needs include cracked crowns, eroded mortar joints, spalling brick, missing caps, and failed flashing. We rebuild crowns, repoint mortar, rebuild chimney tops, and install new step and counter-flashing. See our chimney repair and flashing page.

Gutters and Siding

Gutters protect foundations and wood trim, and on close-set houses they keep water from spilling toward the neighbor’s foundation. We install and replace gutters and downspouts, replace rotted fascia, and route water away from both houses. As siding contractors, we also repair and install siding with proper flashing at windows, doors, and the roofline. See our gutter and siding services.

Storm Damage

After a storm, look from the ground for missing shingles, bent flashing, branches on the roof, and loose gutters, and check ceilings for new stains. Photograph damage before repairs. If you plan to file an insurance claim, coverage decisions belong to your insurer, but good documentation helps. A temporary tarp limits damage until permanent repairs are made.

A Simple Maintenance Routine

  • Spring: check for winter damage and look in the attic for damp spots
  • Summer: trim branches and look at the chimney from the ground
  • Fall: clean gutters after the street trees drop their leaves
  • After storms: check the roof from the ground

Signs Your Roof Needs Attention

  • Water stains on top-floor ceilings
  • Missing, cracked, or curling shingles
  • Granules in gutters
  • A sagging roofline
  • Loose or crumbling chimney brick
  • Moss or heavy algae

Repair or Replace?

If the problem is a single joint or a small area, a repair is usually the right step. If the shingles are worn out, there are multiple layers, or the deck is soft in several places, replacement is the better investment. We give you our honest recommendation.

What Affects the Cost

  • Roof size and steepness
  • Dormers, porch roofs, and chimneys
  • Number of old layers to remove
  • Deck repairs after tear-off
  • Access on a narrow lot
  • Shingle line and color

Questions to Ask at Your Estimate

  • How many layers will be removed, and how will deck repairs be priced?
  • How will the seam with an attached neighbor be handled?
  • Will all flashing be replaced?
  • How will neighboring property be protected?
  • Whether any permit or approval applies

Hiring Tips

Get a written scope of work, confirm whether any permit or approval applies, and ask how hidden deck damage will be priced. New Jersey generally requires home improvement contractors working on residential property to register with the Division of Consumer Affairs, and you can verify a registration online.

Collingswood Roofing FAQs

Do you serve Knight Park and the rest of Collingswood?

Yes. We serve homeowners throughout the borough.

I share a roofline with my neighbor. Can I replace just my side?

Yes. We tie the new roof into the neighbor’s side at the seam and flash any shared wall or chimney properly.

How do you protect my neighbor’s house during the job?

We use tarps and catch-alls along the sides of the house, protect cars and plantings, and clean up daily.

Why does my older house leak near the chimney?

Most chimney leaks come from failed flashing or a cracked crown. Repairing both usually solves it.

Do I need a permit to replace my roof?

Usually not. Replacing the roof covering on a detached one- or two-family home is generally treated as ordinary maintenance under New Jersey’s Uniform Construction Code (N.J.A.C. 5:23-2.7), so a construction permit is usually not required. Structural work such as replacing rafters, attached homes, and historic-district or HOA rules can change that, so check with your municipal construction office or ask us during your free inspection.

How long does a roof replacement take?

Most single-family replacements are completed in a short window once work begins, depending on roof size, complexity, and weather.

Can you work on just the front porch roof?

Often, yes. If the main roof is sound, we replace the porch roof and re-flash where it meets the house.

Where is your office?

In East Rutherford. We also have a regional location in Haddonfield that serves Collingswood.

Nearby Areas We Serve

Neighboring pages: Camden, Cherry Hill, and Pennsauken. See all of our service areas.

Collingswood Roofing Contractors With a Nearby Regional Office in Haddonfield

Monarch Roofing & Construction serves Collingswood homeowners in Knight Park, along Haddon Avenue, and on the borough’s tree-lined residential streets between the Cooper River and Newton Creek. Our nearby regional office is located at 55 Centre St, Haddonfield, NJ 08033, and our main headquarters is located at 168 Humboldt St, East Rutherford, NJ 07073.

Schedule a Roofing Appointment Online

Book a free roof inspection or free roofing estimate for your Collingswood home online, or call or text.

Collingswood, NJ Roofing Questions Answered

Who provides roofing services in Collingswood, NJ?

Monarch Roofing & Construction serves Collingswood homeowners with roof repair, roof replacement, roof installation, roof leak repair, asphalt shingle roofing, chimney repair and chimney flashing, and siding. Collingswood is served through our regional office in Haddonfield and our headquarters in East Rutherford. NJ Home Improvement Contractor #13VH12036000; call or text (551) 241-0470.

Where can I find roof repair near me in Collingswood?

Monarch Roofing & Construction repairs roofs throughout Collingswood, from porch roofs and chimneys on older homes to shared rooflines on attached houses. Book a free inspection online or by phone.

Who offers free roof inspections in Collingswood?

Monarch Roofing & Construction offers free roof inspections and free roofing estimates. Schedule online or call or text (551) 241-0470.

How do I choose a reliable roofing contractor?

Check New Jersey Home Improvement Contractor registration, get a written scope, confirm whether any permit or approval applies, and request proof of insurance. On close lots, ask how neighboring homes will be protected during the work.

Should I repair or replace my roof?

Many older-home leaks come from a chimney, a porch joint, or one section of flashing and can be repaired. Replacement is the better choice when shingles are worn throughout or the roof already carries multiple layers.

How much does roof replacement cost in Collingswood?

Cost depends on roof size and pitch, dormers and porch roofs, layers to remove, decking condition, chimney and flashing work, ventilation, the shingle line, access on narrow lots, and any permit or approval fees that apply. A free written estimate gives your real number.

What are the signs of roof damage?

Stains near chimneys or along walls, missing or cracked shingles, granules in gutters, moss under street trees, and loose or tarred-over flashing.

How can I schedule a roofing estimate?

Use the scheduling button above, call or text (551) 241-0470, or email monarchroofingnj@gmail.com.

Honest Roof Assessments on Tree-Lined Streets

Our approach in Collingswood is the same as everywhere: Honest Roof Assessments. Clear Recommendations. Repairs When Possible. Replacement When Necessary. On older homes with decades of repairs, the best answer is often a careful repair rather than a full replacement. When replacement is the right call, we explain why.

Weather Between Two Waterways

Collingswood sits between the Cooper River and Newton Creek, with dense tree cover on many streets. Shade and nearby water keep some slopes damp, which encourages moss and algae, and falling leaves fill gutters and valleys every autumn. Winter freeze-thaw cycles loosen chimney mortar and crack old sealant, and summer storms bring gusts that can lift worn shingles. Roofs here benefit most from clean gutters and valleys, sound chimney masonry, and good attic ventilation.

Diagnosing Leaks in Older, Close-Set Homes

Leaks in older homes often travel before they appear. We trace stains from inside to the attic and up to the source, checking:

  • Chimneys, where flashing and mortar both matter
  • Dormer cheeks and walls, which depend on step flashing at every course
  • Porch roofs where they meet the house, a classic leak point
  • Shared rooflines on attached homes, where two roofs meet
  • Valleys packed with leaves from street trees

Where flashing has been covered with tar, the lasting fix is usually to replace the flashing underneath.

Flashing Basics

  • Chimney flashing: step flashing on the sides and counter-flashing set into sound mortar, with a cricket behind wide chimneys
  • Step flashing: at every course where roof meets wall
  • Pipe flashing: new boots at plumbing vents
  • Kick-out flashing: at the bottom of porch and addition joints

Decking, Underlayment, Ice and Water Shield, and Drip Edge

After tear-off, board or plywood decking is checked and damaged sections are replaced. On older homes, plywood may be added over boards for a flat nailing surface. Drip edge goes along eaves and rakes, ice and water shield at the eaves, valleys, and around chimneys and walls, and synthetic underlayment over the rest.

Ventilation in Older Attics

Many older Collingswood attics have little soffit intake. Adding balanced intake and exhaust during a replacement reduces summer heat and winter condensation, protecting both the shingles and the deck.

What a Clear Estimate Includes

  1. Roof areas, including porches and dormers
  2. Layers removed
  3. Decking terms and pricing
  4. Underlayment and ice and water shield locations
  5. Drip edge
  6. Flashing replacement at chimneys, walls, and vents
  7. Ventilation plan
  8. Shingle line and color
  9. Protection of neighboring homes and cleanup

Storm Damage

Photograph damage from the ground and interior stains, with dates. Keep fallen shingles and schedule an inspection. If you file a claim, the insurance company decides what is covered.

The Replacement Process

  1. Free inspection and written estimate
  2. Shingle and color selection
  3. Scheduling and planning on a narrow lot
  4. Tear-off to the deck
  5. Deck repair
  6. Drip edge, ice and water shield, underlayment
  7. Flashing, asphalt shingles, ridge caps, ventilation
  8. Cleanup and walkthrough

More Collingswood Roofing Questions

Is moss under street trees a reason to replace my roof?

Not by itself. Moss should be removed gently and drainage improved. Replacement depends on the shingles’ overall condition.

Do older homes need new drip edge?

Many never had it. Adding drip edge during a replacement protects the fascia and the deck edge.

Can my roof and gutters be replaced at the same time?

Yes. Gutters and siding are part of our residential services and can be coordinated with roofing.

Explore our roofing services, chimney services, siding services, and locations. We also serve neighboring Haddon Township, Oaklyn, and Woodlynne.

A Closer Look at Roofs in Collingswood

Collingswood packs about 14,200 residents into less than two square miles between the Cooper River on the north and Newton Creek on the south. Haddon Avenue runs through its commercial historic district, U.S. Routes 30 and 130 pass through the borough, and the PATCO Collingswood station connects it to Philadelphia. Its history runs deep: the Stokes-Lees mansion dates to 1707 and the Collings-Knight homestead to the 1820s. Homes sit close together on tree-lined streets, so roof work here has its own practical considerations. This section takes the form of common myths and the facts behind them, followed by practical topics this page has not yet covered.

Myths and Facts About Collingswood Roofs

Myth: A leak always comes from directly above the stain.

Fact: Water often travels along rafters, sheathing, or the top of a wall before dripping. A stain in a front bedroom can start at a dormer or chimney several feet away. Tracing the path from the attic side, when there is access, is the most reliable method.

Myth: A new layer of shingles over the old one is just as good.

Fact: Overlaying hides the deck, adds weight, and keeps old flashing in place. A full tear-off lets soft boards be replaced and flashing renewed. On older homes with board decking, seeing the deck is especially important.

Myth: More attic vents are always better.

Fact: Balance matters more than number. Intake at the soffits and exhaust near the ridge should work together; mixing exhaust types, such as a ridge vent with gable vents, can short-circuit airflow.

Myth: Roof cement fixes flashing problems.

Fact: Sealant is a temporary measure. Step flashing woven with the shingles, counter flashing at chimneys and masonry walls, and kick-outs at the bottom of roof-to-wall joints are what keep water out long-term.

Myth: Dark streaks mean the roof is failing.

Fact: Streaks are usually algae, which is mostly cosmetic. Granule loss, cracking, curling, and missing shingles are the signs of real wear.

Myth: Ice dams are caused by clogged gutters.

Fact: Clogged gutters can make them worse, but the cause is heat escaping into the attic and melting snow that refreezes at the cold eave. Air sealing, insulation, and ventilation address the cause.

Working on Close-Set Lots

Many Collingswood homes have narrow side yards, shared driveways, or neighboring houses within a few feet. Before replacement day, talk with neighbors about access, ladder placement, and debris, since tarps and protection may need to cover their side yards or cars. Plan where the dumpster can go, and check whether placing it on the street requires approval. Move vehicles, patio furniture, and planters, and take fragile items off upper-floor walls.

Chimneys: Repair or Rebuild?

Older chimneys often have cracked crowns, washed-out mortar, and tired flashing. A crown and flashing can usually be repaired on their own; loose bricks or a leaning stack may call for a partial rebuild above the roofline. A replacement is the best time to install new chimney flashing.

Is It Hail or Wind?

Wind leaves missing or creased shingles along edges and ridges; hail leaves round bruises and dents gutters and vents. If you file a claim, your insurance company decides what is covered.

Choosing Colors on a Historic Street

On streets with a consistent character, choose shingle colors that suit the house style and the neighborhood. View full-size samples against siding, brick, and trim in daylight. If your home is in a designated historic area, check whether any approval applies before ordering.

Buying or Selling in Collingswood

Sellers should gather the installation date, written scope, and inspection reports. Buyers should ask for those records and look for stains near chimneys, dormers, and walls under lower roofs. A roof inspection gives both sides a clear description of condition.

Keeping a Roof Record

Keep the installation date, shingle product and color, written scope, inspection reports, storm photos, and receipts together.

Gutters and Downspouts Between Close Houses

Where houses stand a few feet apart, a downspout that empties into the narrow side yard can send water toward both foundations. Extensions, splash blocks, or redirecting a downspout to the front or rear of the lot keep water moving away from the buildings. Gutters should be pitched toward their downspouts, held by hangers spaced closely enough to carry water and ice, and sized for the roof area they serve. Shade from mature street trees means leaves and seed pods collect quickly, so plan on cleaning gutters and valleys in late fall and again in spring, and check them after heavy storms.

More Collingswood Roof Questions

Why is my stain in a different place from the leak?

Water travels along framing before it drips, so the entry point can be several feet from the stain.

Do dark streaks mean I need a new roof?

Usually not. Streaks are typically algae. Granule loss, cracking, and missing shingles indicate real wear.

Will my neighbors be affected by my roof replacement?

On close-set lots, debris and ladders may reach neighboring yards, so advance notice and protection are important.

Can I just add more vents to fix a hot attic?

Balance between intake and exhaust matters more than the number of vents. An inspection can show what the attic needs.

Request a Free Roofing Estimate in Collingswood

Monarch Roofing & Construction
168 Humboldt St, East Rutherford, NJ 07073
Call or text: (551) 241-0470
Email: monarchroofingnj@gmail.com
Request a free estimate online