Chimney Rebuilding in New Jersey
When a chimney has deteriorated beyond spot repairs, rebuilding part or all of the exterior stack, with the flashing and roofing around it handled as part of the same project.
NJ HIC #13VH12036000 | Serving homeowners across New Jersey from East Rutherford
- Free inspection & estimateNo-cost first visit
- NJ HIC #13VH12036000Registered Home Improvement Contractor
- East Rutherford headquarters168 Humboldt St
- Convenient online schedulingRequest online, then pick a time
When repairs are no longer enough
Some chimneys reach a point where patching one area only moves the problem to the next. Loose brick across large sections, masonry that has softened or crumbled deep into the stack, or a chimney that has started to lean are all signs that rebuilding should be considered.
A rebuild means taking the damaged masonry down to sound material and laying it back up with new brick and mortar, then finishing with a new crown and, where appropriate, a cap. A partial rebuild usually covers the section above the roofline, which takes the most weather. A full rebuild goes further down when the deterioration extends below the roof.
We start by evaluating how far the damage goes, explain whether a partial or full rebuild fits the situation, and give you a clear scope before anything is taken apart.
Coordinating with the roof
Taking a chimney down affects the roofing and flashing around it. We plan the rebuild together with the flashing and surrounding shingles so the finished chimney ties properly into the roof. If a roof replacement is coming up, it often makes sense to plan both together.
Signs a chimney may need rebuilding
One of these on its own may still be repairable. Several together usually point toward a rebuild.
Leaning or tilting
A chimney that is visibly out of plumb or pulling away from the house.
Widespread loose brick
Bricks that move or have fallen out across large areas, not just a spot or two.
Deep mortar failure
Joints that have washed out deeply enough that the brick is no longer well supported.
Cracks through the masonry
Cracks running through brick and mortar, not only along the surface.
Long-term water damage
Masonry that has stayed wet for years, with heavy staining and spalling.
Repeated failed repairs
Patches and sealants layered on over time that keep failing.
Partial rebuild or full rebuild?
How much of the chimney needs to come down depends on where the sound masonry starts.
When a partial rebuild may be enough
- Damage concentrated above the roofline
- Sound masonry below the roof
- No significant leaning below the roof
- Interior chimney walls in good condition
When a full rebuild may be needed
- Deterioration continuing below the roofline
- Leaning or movement lower in the chimney
- Structural cracking through the stack
- Masonry that is unsound throughout
Factors that affect the decision
How far down the damage goes, whether the chimney is still used for venting, how it ties into the roof, local permit requirements and whether other roof work is planned.
When further investigation is needed
The true condition of the masonry sometimes only shows once the top courses are removed. If we find that sound brick starts lower than expected, we stop and review the scope with you before continuing. If a chimney serves a fireplace or appliance, the flue and liner should be evaluated by a qualified chimney safety professional.
How chimney rebuilding works
Request
Send the form with photos, or call or text us.
Evaluate
We assess the chimney, how far the damage goes and the roof around it.
Scope & estimate
We explain partial versus full rebuild and provide a written estimate.
Take down
Damaged masonry is removed to sound material with the roof protected.
Rebuild
New brick, mortar, crown and flashing are installed and tied into the roof.
Review
We clean up and walk you through the finished chimney.
Rebuild timing depends on size, weather and any permits required. We confirm scheduling when you approve the estimate.
Materials in a chimney rebuild
A rebuilt chimney is only as good as the details at the top and at the roofline.
Brick
New brick chosen to suit the home, matched to any remaining masonry as closely as practical.
Mortar
Mortar suited to the brick and exposure, with full, well-tooled joints.
Crown
A new crown shaped to shed water away from the flue and past the face of the brick.
Flashing
New metal flashing integrated with the roof covering where the chimney passes through.
What customers say about our chimney rebuilds
Excerpt“I hired Monarch Roofing Construction to completely rebuild my old, damaged chimney, and I’m beyond impressed with the outcome. … They demolished the old structure safely, rebuilt it from the roof up with precision, and made sure everything was up to code.”
Excerpt“They did my chimney from roof and up and did come out nice”
Excerpt“From start to finish, Matt was professional, responsive, and very easy to work with. … Matt and his team completed my roof and chimney efficiently while paying close attention to detail.”
Quoted from our Google Business Profile. Rating and count as of October 28, 2026.
Chimney rebuilding across New Jersey
Rebuild projects are planned and run from our East Rutherford headquarters for homeowners in all 21 New Jersey counties, depending on availability. Find your area below.
Headquarters
168 Humboldt St, East Rutherford, NJ 07073
(551) 241-0470 · monarchroofingnj@gmail.com
Service availability can vary by location and schedule. See all service areas.
Chimney rebuilding FAQs
What is the difference between a partial and full rebuild?
A partial rebuild replaces the damaged upper section, usually above the roofline. A full rebuild goes further down because the deterioration extends below the roof.
How do you decide how much to rebuild?
We look at where the masonry is still sound. The goal is to rebuild only what needs it, and the final point is sometimes confirmed once the top courses come off.
Will rebuilding the chimney affect my roof?
Yes, the roofing and flashing around the chimney are disturbed during the work. We plan for that and include flashing and roof tie-in work in the scope.
Should I rebuild the chimney before a new roof?
If both are needed, doing the chimney first or at the same time avoids disturbing new roofing later. We can help you plan the order.
Do I need a permit to rebuild a chimney?
It depends on the town and the scope. Some rebuilds require permits or inspections. We will tell you what applies to your project.
What if I no longer use the chimney?
Options can include rebuilding it as is or other approaches, depending on what it serves and local requirements. We discuss what makes sense.
Can the new chimney match my house?
We choose brick and mortar to suit the home. If part of the original chimney remains, we match it as closely as available materials allow.
Is the evaluation free?
Yes. Rebuild evaluations and estimates are free.
Request Your Free Chimney Rebuild Estimate
Tell us about your project, upload photos if available, and choose your preferred inspection date and time.
Please note: preferred dates and times are requests until your booking is confirmed.
Prefer to talk? Call or text (551) 241-0470 or email monarchroofingnj@gmail.com.
Is Your Chimney Past Repairing?
Send photos of the chimney and tell us what you are seeing. We will evaluate how far the damage goes and give you a free estimate.