Home / Services / Decks & Outdoor Living
Decks & Outdoor Living · Composite DeckingComposite Decking in New Jersey
Composite boards for new decks and resurfacing, installed the way the specific product calls for, on framing that is ready to support it.
NJ HIC #13VH12036000 | Serving homeowners across New Jersey from East Rutherford
- Free inspection & estimateNo-cost first visit
- NJ HIC #13VH12036000Registered Home Improvement Contractor
- East Rutherford headquarters168 Humboldt St
- Convenient online schedulingRequest online, then pick a time
What composite decking is, and what it asks of the installer
Composite decking is made from a blend of materials, commonly wood fibers and plastics, and many products have a protective outer shell. Homeowners choose it because it does not need regular staining or sealing the way wood does, it resists splintering, and it comes in a range of colors and textures.
Composite is not maintenance-free, and it is not installed exactly like wood. Each product line has its own requirements for joist spacing, fastening, gapping, ventilation under the deck and how board ends and edges are finished. Following those instructions matters for appearance, performance and the manufacturer’s warranty terms.
Composite boards are only as good as the framing underneath. Whether you are building new or resurfacing an existing deck, we check that the joists are sound, flat and spaced correctly for the product you choose before any boards go down.
Resurfacing an existing deck
Putting composite boards on an old frame can make sense when the framing is in good condition and spaced appropriately. If it is not, the frame needs repair or replacement first. We tell you which applies after looking underneath.
Composite problems that start with installation
Most complaints about composite decks trace back to how they were installed rather than the boards themselves.
Wrong joist spacing
Boards spanning farther than the product allows can flex or sag between joists.
Uneven framing
Old joists that are crowned or twisted show through as wavy decking.
Gaps that open or close
Boards expand and contract with temperature; incorrect gapping causes buckling or wide gaps.
Poor ventilation
Low decks without airflow underneath can trap moisture against the framing.
Fastener issues
Using the wrong fasteners or method can cause mushrooming, splitting or loose boards.
Water at the framing
Wood joists under composite still need protection where water collects.
How composite compares with wood
Neither is right for every home. These are the general tradeoffs we discuss.
Reasons homeowners choose composite
- No regular staining or sealing
- Resists splintering
- Consistent color and texture
- Hidden fastening options on many products
Reasons homeowners choose wood
- Natural look and feel
- Can be sanded and refinished
- Usually a lower material cost
- Individual boards easy to source and replace
Factors that affect the decision
Budget, appearance, how much maintenance you want to do, how hot the deck surface gets in full sun, and whether the existing framing can be reused.
When further investigation is needed
Surface temperature, color fading and cleaning needs differ between products. We point you to each manufacturer’s published information rather than making promises on their behalf.
How a composite deck project works
Request
Send the form with photos of the deck or space, or call or text us.
Evaluate
We look at the site or the existing framing and measure the area.
Choose a product
We review composite options and the requirements of each.
Estimate
You receive an estimate that reflects framing work and the chosen product.
Prepare & install
Framing is repaired or built, then boards are installed per the product instructions.
Review
We walk through the deck, explain basic care, and clean up.
Lead times depend on the product and supplier. Permits may apply to new decks or structural work, depending on the town.
Composite decking components
A composite deck system is more than boards. These are the parts we plan together.
Decking boards
Capped and uncapped composite boards in a range of colors, textures and widths.
Fastening systems
Hidden clips or face screws, depending on what the product line specifies.
Fascia & trim
Matching fascia boards that finish the deck edges and cover framing.
Framing & protection
Wood or other framing at the spacing the product requires, with attention to drainage and airflow.
What Our Customers Say
We have not yet received Google reviews about composite decking specifically. These are genuine Google reviews about our work in general.
“They do great work, are very friendly and helpful! I recommend Monarch Roofing & Construction to anyone that needs work on their property!”
“We have used Matt a couple of times and referred him to our family members as well. He has done an excellent job for all the jobs. He is reliable and very professional.”
“Matt is very professional courteous and knowledgeable. Company is very reliable in the work you need to be done.”
Quoted from our Google Business Profile. Rating and count as of October 28, 2026.
Composite decking across New Jersey
We serve homeowners in all 21 New Jersey counties from East Rutherford, subject to availability. Choose your county or look up your town.
Headquarters
168 Humboldt St, East Rutherford, NJ 07073
(551) 241-0470 · monarchroofingnj@gmail.com
Service availability can vary by location and schedule. See all service areas.
Composite decking FAQs
Is composite decking maintenance-free?
No. It does not need staining, but it still needs periodic cleaning to remove dirt, pollen and mildew. Follow the manufacturer’s care guidance for your product.
Which composite brand do you use?
We do not push a particular brand. We review available options with you and install the one you choose according to its instructions.
Can composite go on my existing deck frame?
Sometimes. The frame must be sound, flat and spaced as the product requires. Many older frames need repairs or added joists first.
Why does joist spacing matter so much?
Composite boards are typically more flexible than wood. Each product lists a maximum span, and exceeding it can lead to sagging.
Do composite boards get hot?
Many do in direct sun, and darker colors usually get hotter. Manufacturers publish information on this, which we can help you compare.
What are hidden fasteners?
Clips that hold boards from the side so no screw heads show on the surface. Whether they can be used depends on the board profile.
Does the warranty depend on installation?
Manufacturer warranty terms usually require installation to their instructions. The terms are set by the manufacturer, so review them for the product you select.
Is the estimate free?
Yes. We evaluate the framing or site and provide an estimate at no cost.
Request Your Free Composite Decking Estimate
Tell us about your project, upload photos if available, and choose your preferred inspection date and time.
Please note: preferred dates and times are requests until your booking is confirmed.
Prefer to talk? Call or text (551) 241-0470 or email monarchroofingnj@gmail.com.
Considering a Composite Deck?
Send photos of your deck or yard. We will check what is underneath, talk through options, and provide a free estimate.