Roofing Companies in Longport, NJ

Longport is a small borough at the southern tip of Absecon Island, where the island meets Great Egg Harbor Inlet. It was incorporated in 1898 and covers about 1.6 square miles, roughly three-quarters of it water. The 2020 census counted fewer than 900 year-round residents, while the borough had about 1,650 housing units in 2010, many of them seasonal. Longport borders Margate City on the island and Seaview Harbor in Egg Harbor Township across the water. No major highway enters the borough; County Route 629 runs through it, and the Longport–Somers Point Boulevard (Route 152) bridges connect it to the mainland. In 2018, Longport had the highest average property tax bill in Atlantic County.

Few towns show the power of the sea as clearly. Storms between 1900 and 1916 washed away about 180 acres, including ten streets, which is why Longport’s streets begin at 11th Avenue. In 2012, a fire during a derecho destroyed the Church of the Redeemer.

Monarch Roofing & Construction serves Longport homeowners from our office at 168 Humboldt St in East Rutherford, our headquarters. We repair and replace pitched shingle roofs, repair chimneys and chimney flashing, handle storm-related roof damage, and install gutters and siding.

Building a Roof for the Tip of the Island

Water on three sides

Between the ocean, the inlet, and the bay, Longport homes face wind from almost every direction. Storms test a roof at its edges first, where gusts lift shingles at the eaves, rakes, corners, and ridge. On a roof this exposed, correct nailing, sealed starter strips, solid drip edge, and securely fastened ridge caps are essential, not optional.

Salt and corrosion

Salt carried on the wind attacks exposed metal: drip edge, flashing, vent hardware, and nail heads. We pay close attention to the flashing metals and fasteners used when a roof is replaced.

Seasonal homes

With many homes empty for part of the year, damage from a fall or winter storm can go unnoticed for months. Inspections timed around the season, with photos sent to the owner, close that gap.

Getting on and off the island

Deliveries, dumpster placement, and parking all take planning on a small island borough. We work this out at the estimate and schedule around the busiest summer days when possible.

Derechos and Straight-Line Wind

The 2012 storm that struck Longport was a derecho, a long-lived band of thunderstorms that produces damaging straight-line winds over a wide area. Storms like this do not need to be hurricanes to strip shingles. They hit fast, often with little warning, and they find the weakest edge on a roof. That is one more reason the fastening details at eaves, rakes, and ridges matter so much at the tip of the island.

Which Roofs We Work On

We work on homes with pitched asphalt shingle roofs, along with chimneys, flashing, gutters, and siding. We do not work on low-slope roofs or large multi-unit buildings. During the estimate, we tell you plainly whether your roof is work we do.

What We Check During an Inspection

• Shingles: lifted tabs, creases, granule loss, and missing pieces
• Edges: drip edge, rakes, starter course, and ridge caps
• Metal: corrosion on flashing, vents, and fasteners
• Flashing: chimneys, walls, porch roofs, and valleys
• Attic: airflow, moisture, stains, or daylight

You get a clear explanation, photos, and a free written estimate.

Roof Repair in Longport

Common repairs on Longport roofs:

• Replacing storm-damaged shingles
• Refastening or replacing loose edge metal
• Swapping out corroded flashing and vent hardware
• Replacing cracked plumbing vent boots
• Replacing rotted fascia and trim

We trace leaks to where water actually gets in, since wind-driven rain often travels before it shows. More on our roof repair and leak detection.

Roof Replacement in Longport

When a shingle roof is worn or keeps losing shingles, replacement is the lasting fix. How we do it:

1. Plan access, parking, and the dumpster
2. Protect the house and neighboring property
3. Remove the old roof down to the deck
4. Repair or replace damaged sheathing
5. Install leak barrier at the eaves, valleys, and chimneys
6. Underlay the rest of the deck
7. Install new drip edge and flashing with corrosion-resistant fasteners
8. Balance attic ventilation
9. Install starter strips, shingles, and ridge caps using the manufacturer’s high-wind method
10. Clean up and magnet-sweep the property and street

Why We Strip the Old Roof

Shingles nailed through an older layer hold poorly in wind and hide rotted sheathing and corroded metal. Starting from the deck lets us fix what is underneath.

The Day of the Job

We protect the property first, work in sections, and seal anything open before leaving each day. If we find rotted wood, we photograph it and check with you before replacing it, even if you are not in town. We finish with a cleanup, a nail sweep, and a walk-through or photo report.

Porches and Decks

Covered porches and decks join the house at a wall, and that joint relies on step flashing woven into the shingles with counter-flashing over it. We check pitch and flashing on every section and tell you if any part is too flat for shingles.

Shingle Choices

Architectural asphalt shingles are the norm for pitched roofs here. Compare wind ratings and ask what installation each requires, since the highest ratings usually depend on specific nailing.

Attic Moisture

A house that sits closed in damp island air needs balanced soffit and ridge ventilation. Without it, moisture condenses under the deck, rusting nails and softening sheathing.

Chimney Work

Chimneys here take salt air and wind-driven rain. We rebuild cracked crowns, repoint mortar, rebuild chimneys beyond repair, and install new step and counter-flashing. See our chimney repair and flashing page.

Gutters and Siding

We replace gutters and downspouts, repair rotted fascia, and route water away from foundations. We also repair and replace siding with careful flashing at windows, doors, and the roofline. See our gutter and siding services.

After a Storm

If you are in Longport, check the roof from the street for missing shingles, lifted edges, and loose gutters. If you are away, ask a neighbor or property manager for photos. If you file an insurance claim, your insurer decides coverage, but clear documentation helps. A tarp can limit interior damage until repairs are made.

Seasonal Owner’s Checklist

• Roof check in spring before opening and in fall before closing the house
• Someone lined up to look at the roof after major storms
• Gutters cleaned before you leave for the season
• Dated photos of the roof kept on file

Warning Signs

• Ceiling stains when you reopen the house
• Lifted, creased, or missing shingles
• Rust on flashing or edge metal
• A musty smell in the attic

Repair or Replace?

Isolated wind damage on a healthy roof is usually a repair. Repeated blow-offs, widespread wear, or soft decking usually mean replacement.

What Drives the Price

• Roof size, pitch, and complexity
• Number of layers to remove
• Deck repairs
• Flashing and edge metal
• Access and staging
• Shingle line and wind-rated installation

Questions for Your Estimate

• What wind rating will the shingles have, and what installation does it require?
• What flashing metals and fasteners will you use?
• How will access and the dumpster be handled?
• Whether any permit or approval applies

Hiring Tips

Get a written scope, confirm whether any permit or approval applies, and ask how hidden deck damage will be priced. After major storms, be wary of unsolicited contractors pushing quick decisions. New Jersey generally requires residential home improvement contractors to register with the Division of Consumer Affairs, and registrations can be checked online.

Longport Roofing FAQs

Can you handle my Longport roof while I am away?

Yes. We can inspect with whoever has access and send photos and a written estimate by email or text.

Why are Longport’s roofs so exposed to wind?

With the ocean, inlet, and bay surrounding the borough, wind arrives from nearly every direction with little to slow it.

Does salt air affect my roof?

It speeds corrosion of exposed metal such as flashing, drip edge, and fasteners. We check these during every inspection.

Is a permit needed for a new roof?

Usually not. Replacing the roof covering on a detached one- or two-family home is generally treated as ordinary maintenance under New Jersey’s Uniform Construction Code (N.J.A.C. 5:23-2.7), so a construction permit is usually not required. Structural work such as replacing rafters, attached homes, and historic-district or HOA rules can change that, so check with your municipal construction office or ask us during your free inspection.

Where is your office?

In East Rutherford. We also have a regional location in Pleasantville that serves Longport.

Nearby Areas We Serve

Neighboring page: Margate City, plus nearby Ventnor City. See all of our service areas.

Longport Roofing Contractors and Our Nearby Pleasantville Regional Office

Monarch Roofing & Construction serves homeowners throughout Longport at the southern tip of Absecon Island. Our nearby regional office is located at 310 W Wright St, Pleasantville, NJ 08232, and our main headquarters is located at 168 Humboldt St, East Rutherford, NJ 07073.

Schedule a Roofing Appointment Online

Book a free roof inspection or free roofing estimate for your Longport home online, or call or text (551) 241-0470.

Longport, NJ Roofing Questions Answered

Who provides roofing services in Longport, NJ?

Monarch Roofing & Construction offers roof repair, roof replacement, roof installation, roof leak repair, asphalt shingle roofing, chimney repair and chimney flashing, and siding to Longport homeowners. Our nearest regional office is in Pleasantville, and our headquarters is in East Rutherford. NJ HIC #13VH12036000. Call or text (551) 241-0470.

Where can I find roof repair near me in Longport?

Monarch Roofing & Construction repairs pitched shingle roofs across the borough, with our Pleasantville regional office on the nearby mainland.

Who offers free roof inspections in Longport?

Monarch offers free roof inspections and free roofing estimates. Book online or call or text (551) 241-0470.

How do I choose a reliable roofing contractor?

Check the New Jersey HIC registration, get a written scope with materials and decking terms, confirm whether any permit or approval applies, and request proof of insurance. Ask what fasteners and flashing will be used for salt exposure.

Should I repair or replace my roof?

Repair for limited storm damage; replace when wear, corrosion, or decking problems are widespread.

How much does roof replacement cost in Longport?

It depends on size, pitch, layers, decking, flashing, ventilation, shingle line, access, and any permit or approval fees that apply. A free written estimate gives the real number.

What are the signs of roof damage?

Missing or lifted shingles, rust below flashing, ceiling stains, loose ridge caps, and granules in gutters.

How can I schedule a roofing estimate?

Use the online scheduling button above, call or text (551) 241-0470, or email monarchroofingnj@gmail.com.

Honest Assessments at the Tip of the Island

Honest Roof Assessments. Clear Recommendations. Repairs When Possible. Replacement When Necessary. Longport’s roofs face some of the harshest exposure in Atlantic County. We document conditions with photos and recommend repair whenever it will hold.

Water on Three Sides

With the ocean, Great Egg Harbor Inlet, and the bay around it, Longport is exposed to wind from nearly every direction. Its history includes storms that washed away entire blocks in the early 1900s and a 2012 derecho. Salt air corrodes metal components quickly, and humidity keeps roofs and attics damp. Corrosion-resistant fasteners and flashing, sealed starter strips, and wind-rated ridge caps are especially important here.

Inspection, Leaks, and Storm Damage

Our free inspection covers every slope, flashing, vents, gutters, and the attic where accessible. Roof leak repair in Longport traces water to its source and repairs it there. After a storm, take dated photos; we can document the roof, and the insurer decides coverage.

The Roof System

Replacements include corrosion-resistant flashing and fasteners, drip edge, ice and water shield, synthetic underlayment, decking repair, and balanced soffit and ridge ventilation, installed under architectural asphalt shingles with high-wind nailing.

More Longport Roofing Questions

Which Monarch office is nearest?

Our nearest regional office is in Pleasantville.

How often should a Longport roof be checked?

Once a year and after any major storm is a sensible routine for a home this exposed.

Explore More

See our roofing services, chimney services, siding services, and locations. Nearby: Margate City roofers and Somers Point roofing.

A Closer Look at Roofs in Longport

Longport sits at the very end of Absecon Island, bordered by the ocean, Great Egg Harbor Inlet, and the bay, with streets that begin at 11th Avenue because the lower blocks were lost to storms long ago. The basics of inspection, repair, and replacement are covered above. This section focuses on details that matter on a roof this exposed: roof shape and wind, ridge caps, edges and fascia, roof-to-wall joints, plumbing vents, and how remote owners can keep track of their roof between visits.

Roof shape and wind

Roof shape affects how a house handles wind. Gable roofs, with two slopes meeting at a ridge and triangular walls at each end, have long rake edges where wind can get under the shingles. Hip roofs, which slope down on all four sides, have no gable ends and shorter edges exposed to uplift. Many homes combine both shapes, along with dormers and bump-outs. No shape is immune, but knowing where your roof’s long exposed edges are tells you where shingles are most likely to lift and where edge details deserve the most attention.

Ridge caps

The ridge is the highest, most exposed line on the roof. Ridge caps on architectural shingle roofs are best made from purpose-built hip and ridge shingles, which are thicker and designed to bend over the peak without cracking. Caps cut from ordinary shingles can crack along the fold and blow off in high wind. Ridge caps should be fastened with nails long enough to penetrate solid wood, especially where a ridge vent sits underneath. Cracked or missing ridge caps expose the vent and the top of the decking to wind-driven rain.

Edges and fascia

Water that is not directed into the gutter runs down the fascia and soaks the bottom edge of the roof deck. On older homes, the eaves can hide rot that shows up only when gutters start pulling away. Drip edge along the eaves and rakes, ice and water shield along the eaves, and sound fascia boards work together to protect the roof edge. During a replacement, soft decking and fascia at the eaves are replaced before the new roof goes on.

Roof-to-wall joints

Where a roof meets a wall, at dormers, second stories, or porches, step flashing behind the siding and kick-out flashing at the bottom keep water out of the wall. On a home that takes wind-driven rain from several directions, a missing kick-out can send water behind siding in every storm. We install siding as well as roofing, so these joints can be rebuilt properly.

Plumbing vents in sun and salt

Plumbing vent boots seal each pipe that passes through the roof. Rubber collars crack in strong sun, and metal bases corrode in salt air. A stain below a bathroom often traces back to a failed boot, which is an inexpensive repair. Upgraded boots with more durable collars are an option during a replacement.

Keeping track of the roof between visits

For owners who are not in Longport year-round:

• Schedule an inspection before the summer season and after any major storm, with photos sent to you.
• Ask a neighbor or property manager to check top-floor ceilings after storms.
• Keep a file with the roof’s installation date, shingle product, repair invoices, and dated photos.
• If water gets in while you are away, have the person on site contain it, photograph it, and stay off the roof.

Insurance claims are decided by your insurer, and dated photos of the roof’s condition can help.

After straight-line wind

Severe straight-line winds, like the 2012 derecho that struck Longport, can lift shingles across an entire slope rather than just at the edges. After that kind of storm, look from the ground for rows of lifted or creased shingles, not only missing ones; creased shingles have lost their seal and may fail in the next storm. Rows of lifted shingles along one slope after a wind event are worth documenting with dated photos and having inspected, since a slope that has lost its seal across many shingles may need more than a spot repair.

Longport Roofing FAQs, Continued

Is a hip roof better than a gable roof in wind?

Hip roofs have no gable ends and shorter exposed edges, which can help in wind. Proper installation matters for both shapes.

Why do ridge caps blow off?

Caps cut from ordinary shingles can crack at the fold, and short nails may not reach solid wood. Purpose-built ridge shingles fastened correctly hold better.

What is a creased shingle?

A shingle that wind lifted and folded, leaving a line across it. It has lost its seal and should be checked.

How can I monitor my roof when I am not in Longport?

Schedule inspections with photos before the season and after storms, and have someone check ceilings after major weather.

Request a Free Roofing Estimate in Longport

Monarch Roofing & Construction
168 Humboldt St, East Rutherford, NJ 07073
Call or text: (551) 241-0470
Email: monarchroofingnj@gmail.com
Request a free estimate online